亚洲电影唐人社一区二区|欧美经典亚洲风情|亚洲va精品中文字幕|国产第一页在线视频

<listing id="uom8r"></listing>

    <listing id="uom8r"></listing>

        <output id="uom8r"></output>
      1. 最近更新

        尼日利亞PC/SONCAP/COC認證

        E-mail 打印 PDF

        ?

        ?

        尼日利亞認證介紹

        如果之前在我們這里申請的PC是在有效期內,那請拿PC過來我們這邊申請COC,申請流程如下:

        客戶提交申請表,發票,裝箱單,FORM M掃描件,PC掃描件---我們安排驗廠(只要一次就可以了),出運前的驗貨(隨機),以及產品抽測(隨機)----所有驗貨及測試都沒有問題的話,產品就可以出貨,如果產品是整柜,我們還需要監裝-----出具COC----IMPORTER拿COC去SON office拿SONCAP清關證書

        ?

        如果客戶之前沒有PC證書,那需要根據新的申請程序來申請COC,申請流程如下;

        出口有3種申請程序:

        ROUTE A,

        1. 申請PRODUCT REPORT,需提交產品的測試報告給我們審核,如果審核通過,我們將出具一份PRODUCT REPORT(只有6個月的有效期并用于一次出貨).

        2. 客戶拿這個PRODUCT REPORT過來申請COC,我們將安排出運前的驗貨以及抽樣測試(每次都需要),如果驗貨以及測試都PASS,那就可以出具COC(如果是整柜出運,我們還需監裝)---IMPORTER去SON office拿SONCAP證書

        ?

        ROUTE B,

        1. 申請PRODUCT REPORT(REGISTRATION), 需提交產品的測試報告給我們審核,如果審核通過,我們將安排一個驗廠,若驗廠通過,就可以出具Product Certificate(REGISTRATION)(1年有效期,可用于多次出貨)

        2.客戶拿這個REGISTRATION過來申請COC,我們將安排出運前的驗貨以及抽驗測試(隨機),如果驗貨以及測試都PASS,那就可以出具COC(如果是整柜出運,我們還需監裝)---IMPORTER去SON office拿SONCAP證書

        ?

        ROUTE C

        1. 申請Product Certificate (LICENSE), 客戶需先符合以下條件:

        是MANUFACTURER,且之前有申請過PRODUCT REPORT(REGISTRATION),并有4次出口符合記錄以及2次驗廠記錄,

        如果符合上述條件,生產商提供有效測試報告以給我們審核,審核通過后就可以出具PRODUCT REPORT(LICENSE).

        申請LICENSE,我們需要2年內驗廠一次。

        2.客戶拿這個LICENSE過來申請COC,我們將安排出運前的驗貨(抽驗),如果驗貨通過,就可以出具COC(如果是整柜出運,我們還需監裝)---IMPORTER去SON office拿SONCAP證書。

        ?

        ?

        以下摘自尼日利亞標準局官方網站:

        SONCAP stands for the Standards Organisation of Nigeria (SON) Conformity Assessment Programme.?In line with the statutory function of the SON as entrenched in the Act No 56 of 1971 and subsequent amendments, the SONCAP programme was introduced in 2005 by the Federal Government of Nigeria to address the challenges of the incessant influx of substandard and unsafe products into the country.

        Three Programme Management Companies (PMC); Swede Control Intertek Limited, SGS Societe Generale de Surveillance and TUV Rheinland Group were appointed to administer SONCAP globally on behalf of SON.

        ?

        ?

        Routes for determining conformity of product(s)

        Each shipment of good(s) or product(s) subject to SONCAP arriving any Nigerian Port must be accompanied by a SONCAP Certificate (SC). The methods employed for achieving these requirements vary according to the nature of product, the risk profile of the manufacturer and the level of conformity met by existing certifications.

        The SON has defined three routes that maybe applied as appropriate conformity assessment procedures for product(s) subject to SONCAP, according to type, risk and effect on the health and safety, and environmental protection. The routes are:

        ? Route A: For unregistered/Unlicensed products (Conformity Verification)

        Each shipment to be imported requires inspection, consignment testing to applicable standards, witnessing of stuffing of Full Container Load (FCL) and affixing of seals to FCL upon the conformity to the requirements, the product is issued with a SC, which is valid only for that particular consignment. The steps shall be as follows:-

        Step 1: Product Report?Product Report (PR), valid for six months to be issued by IAF upon satisfactory completion of:-?- Inspection?- Product Sampling: Samples submitted for testing shall be (i) drawn by the IAF, or (ii) drawn under IAF supervision at the manufacturer’s premises.

        Step 2: Test Report?Test Report to be issued by:?- Approved ISO 17025 laboratories ?- Manufacturer for testing witnessed by IAF

        Step 3: Certificate of Conformity (CoC)?Certificate of Conformity to be issued by IAF upon:- ?- Receipt of satisfactory Test Report as per step 2?- Satisfactory goods verification, witnessing of stuffing of Full Container Loads (FCL) and affixing of seals to FCL based on a risk assessment.?- Receipt of satisfactory final documents

        In the event of non-compliance with the testing and/or inspection requirements, the IAF shall issue a Non Conformity Report.

        ? Route B: For Registered Products (Registration and Conformity Inspection)

        Registration of products is done following type testing and assessment of the manufacturer’s quality system in place in order to determine that the product(s) under consideration is in conformity with the applicable standards and that the manufacturer has the necessary systems in place to produce consistently over a time the same quality product. The steps shall be as follows:-

        Step 1: Product Certificate (Registered Status)

        Product Certificate (PC), valid for one year, to be issued by IAF upon satisfactory completion of audit of manufacturer’s factory.?Manufacturer/Exporter under route A could be elevated to Route B based on good compliance history (minimum of four fully compliant transactions)

        Step 2: Test Report

        Test Report, issued by approved laboratory or manufacturer, to be received by IAF for every shipment but in at least 40% of shipments per quarter the IAF to have either taken the sample for submission to the approved laboratory or to have witnessed the sampling and testing at the manufacturer’s premises

        Step 3: Certificate of Conformity (CoC)??Certificate of Conformity to be issued by IAF upon:-?- Receipt of satisfactory Test Report as per step 2?- Satisfactory goods verification, witnessing of stuffing of Full Container Loads (FCL) and affixing of seals to FCL (where feasible at least 40% of shipments per quarter)?- Receipt of satisfactory final documents

        In the event of non-compliance with the testing and/or inspection requirements, the IAF shall issue a Non Conformity Report.

        ? Route C: For Licensed products (Product Certification Systems)?Licensing of products is based on detailed evaluation of the product, including testing and factory audit and regular surveillances. If in conformity with the relevant NIS or approved equivalents, the product will be granted license. However, at least twice a year pre-shipment verification ie documentary review, process evaluation, inspection of facility, inspection of consignment to be shipped, verification of testing, witnessing of FCL stuffing and sealing of shipments will be conducted to ensure that conformity is maintained. Licensing is only granted to the manufacturer of a product and the process is not available for exporter and/or supplier. The steps shall be as follows:-

        Step 1: Product Certificate (Licensed Status)?Product Certificate (PC), valid for one year, to be issued by IAF upon satisfactory completion of audit of manufacturer’s factory.?Manufacturer under route B could be elevated to Route C based on good compliance history (minimum of four fully compliant transactions and two factory verifications)??Step 2: Test Report?Type Test Report, issued by the manufacturer or approved laboratory, to be received by IAF for every product within the scope of the licensed product certificate.

        Step 3: Certificate of Conformity (CoC)?Certificate of Conformity to be issued by IAF upon:-?- Receipt of satisfactory Test Report as per step 2?- Satisfactory goods verification, witnessing of stuffing of Full Container Loads (FCL) and affixing of seals to FCL (where feasible at least one shipment every six months).?- Receipt of satisfactory final documents

        In the event of non-compliance with the testing and/or inspection requirements, the IAF shall issue a Non Conformity Report.

        ?

        You are here: 全球產品認證 非洲認證 尼日利亞PC/SONCAP/COC認證