亚洲电影唐人社一区二区|欧美经典亚洲风情|亚洲va精品中文字幕|国产第一页在线视频

<listing id="uom8r"></listing>

    <listing id="uom8r"></listing>

        <output id="uom8r"></output>
      1. 最近更新

        ECE R106 關于批準農用機動車及其掛車用充氣輪胎的統一規定2

        E-mail 打印 PDF

        E/ECE/324

        E/ECE/TRANS/505?? ??Rev.2/Add.105/Rev.1/Amend.2

        11 May 2010

        AGREEMENT

        CONCERNING THE ADOPTION OF UNIFORM TECHNICAL PRESCRIPTIONS FOR WHEELED VEHICLES, EQUIPMENT AND PARTS WHICH CAN BE FITTED AND/OR BE USED ON WHEELED VEHICLES AND THE CONDITIONS FOR RECIPROCAL RECOGNITION OF APPROVALS GRANTED ON THE BASIS OF THESE PRESCRIPTIONS

        (Revision 2, including the amendments which entered into force on 16 October 1995)

        Addendum 105:? Regulation No. 106

        Revision 1 - Amendment 2

        Supplement 8 to the original version of the Regulation: Date of entry into force: 17 March 2010

        UNIFORM PROVISIONS CONCERNING THE APPROVAL OF PNEUMATIC TYRES FOR AGRICULTURAL VEHICLES AND THEIR TRAILERS

        UNITED NATIONS

        Former title of the Agreement:

        Agreement Concerning the Adoption of Uniform Conditions of Approval and Reciprocal Recognition of Approval for Motor Vehicle Equipment and Parts, done at Geneva on 20 March 1958.

        GE.10-

        page 2

        Paragraph 2.1.3., amend to read:

        "2.1.3. Category of use:

        1) Tractor - Steering wheel;

        2) Tractor - Drive wheel - standard tread;

        3) Tractor - Drive wheel - special tread;

        4) Implement - traction;

        5) Implement - trailer;

        6) Implement - mixed applications;

        7) Forestry machines – standard tread;

        8) Forestry machines – special tread.

        Paragraph 2.20., amend to read:

        2.20. driven axles of agricultural tractors

        Insert a new paragraph 2.41., to read:

        2.41. Forestry tyre: means a tyre designed to be fitted to machines or equipments used in forestry applications.

        Paragraph 3.1.8., amend to read:

        3.1.8. the inscriptions 'LS-1', 'LS-2', 'LS-3' or'LS-4' in the case of tyres for forestry machines.

        Insert a new paragraph 3.1.8.1., to read:

        3.1.8.1. LS-3' identifies special tread tyres

        Paragraph 5.3., amend to read:

        5.3. Notice of approval or extension or refusal or withdrawal of approval or production definitively discontinued of a type of pneumatic tyre pursuant to this Regulation shall be communicated to the Parties to the 1958 Agreement which apply this Regulation, by means of a form conforming to the model in Annex 1 to this Regulation.

        Paragraph 5.4.2., amend to read:

        5.4.2. The number of this Regulation, followed by the letter "R", a dash and the type approval number.

        Paragraph 6.4.2., amend the second and third row in the table, to read:

        Tractor drive wheels and forestry machines – normal

        Tractor drive wheels and forestry machines – special

        Annex 3

        Part A, amend the title to read:

        PART A: DRIVE WHEEL TYRES FOR AGRICULTURAL TRACTORS

        Add a new part D, to read:

        PART D:? TYRES FOR FORESTRY MACHINES

        Example of the markings to be borne by types of tyres complying with this Regulation

        MINIMUM HEIGHTS OF MARKINGS: b:? 9 mm??? c:? 4 mm

        These markings define a tyre for forestry machines (LS):

        1) Having a nominal section width of 600;

        2) Having a nominal aspect ratio of 55;

        3) Of diagonal ply structure (-);

        4) Having a nominal rim diameter of? 673 mm for which the code is 26.5;

        5) Having an intermediate? tread ("LS-2");

        6) Having a load capacity of 3750 kg, corresponding to load index 154 in Annex 4;

        7) Classified in the speed category A8 (reference speed 40 km/h);

        8) For fitting without an inner tube ("tubeless");

        9) Manufactured during the twenty-fifth week of the year 2006 (see paragraph 3.2. of the Regulation).

        The positioning and order of the markings constituting the tyre designation are as follows:

        1) The size designation, comprising the nominal section width, the nominal aspect ratio, the type of structure symbol (where applicable) and the nominal rim diameter, must be grouped as shown in the above example: 600/55 – 26.5;

        2) The inscription 'LS', followed by the number 1,2, 3 or 4 as appropriate, is placed after the size designation, as shown in the above example: LS-2;

        3) The service description (load index and the speed category symbol) is placed near the size designation. It may either precede or follow it or be placed above or below it;

        4) The symbols 'TUBELESS' and the date of production may be at a distance from the size designation.

        Annex 5,

        Delete from table 4 all data for the following three tyre size designations:

        260/70R16, 260/70R18 and 260/70R20.

        Annex 7

        PART A, amend the title to read:

        PART A: DRIVE WHEEL TYRES FOR AGRICULTURAL TRACTORS

        Add a new part D, to read:

        PART D: TYRES FOR FORESTRY MACHINES Applicable to tyres classified with categories of use: Forestry machines (see paragraph 2.41.)

        Variation of load carrying capacity (per cent) for tyres marked with speed category symbol A8

        Service condition

        Speed (km/h) percent

        Road service

        20?? ???23%

        30????? 7%

        40????? 0%

        You are here: 資料下載 ECE資料下載 ECE R106 關于批準農用機動車及其掛車用充氣輪胎的統一規定2